The raw material used in medical waste containers is resistant to sunlight, heat and cold.
Containers produced according to CE standards are certified according to ISO 9001:2008 and ISO 9001:14001 quality systems.
Plastic garbage containers are manufactured according to TS EN 840 norms.
Body cover material properties of garbage containers:
It is manufactured from high density polyethylene (HDPE).
It is resistant to UV rays.
The light sensitivity of the paint used is maximum and it does not fade or change color in sunlight.
Wheel Material Specifications:
Plastic container with a capacity of 120 liters, the wheel bodies are made of polypropylene and the tires on it are made of a product resistant to all weather conditions.
The carrying capacity of the product is at least 60 Kg./Piece, with a diameter of 200mm and a width of 30mm.
The wheel axle shaft is manufactured from galvanized material.
Body and Wheel General Features:
Conteiner capacity 120lt has 2 wheels and lids.
The containers are stainless, odorless, easy to clean, protected from sun heat, alcohol, yeast, vinegar, acid, ammonia, etc. from corrosive chemicals is unaffected.
The containers are resistant to shock effects and there is no change in any deformation, measure and other properties under the effect of shock.
The bodies of the container are resistant to sun and weather conditions.
The wheels on the containers must be 200mm in diameter.
Capacity of container has a carrying capacity of at least 60 kg.
The wall thickness of the containers is 3.4 mm (+/- 0.5 mm).
Letters are written on the containers with the features and conditions desired by the institution, with silk screen printing or hot stamping.
